Wireless Rotor Runout KitProduct ID:
Users can attach BlueAngle to the end face or the circumference of a rotor with its magnetic base. While the rotor rotates, BlueAngle also rotates with it and continuously measures the rotating angle. At the same time, BlueDial can be set to measure at the edge of the rotating plane. Both sensors transmits data wirelessly to iPad. In the Runout app, displacement measurements from BlueDial and rotating angle readings from BlueAngle are matched to depict the real contour of the rotor in test.
To better visualize collected data, we embed a probe meter for BlueDial readings. Two different options of probe meters with different numbers of ticks are available for different resolution requirements. Additional, users can freely set the range of the probe meter to further adjust display resolution. An analog needle rotates while BlueDial reading changes. For BlueAngle, a rotating arrow follows the value of BlueAngle, indicating the angular position of the rotor.
Runout App can connect up to 9 displacement sensors simultaneously, allowing users to conduct runout test for 9 planes at the same time. An individual reading panel is assigned to each sensor connected without interference between each other.
Once the test session is complete, user can export test data or create and save a test report on the iPad. A local test record manager will allow future access to previous tests data and reports.
Note: The kit comes with one dial. Contact us to customize the kit to add extra dial.
|Measurement Range||0.5" / 12.7mm||0.5" / 12.7mm|
|Resolution||0.0005" / 0.01mm||0.0001" / 0.001mm|
|Wireless Data Rate||10Hz||10Hz|
|Wireless Transmission Range||65ft / 20m (indoors) / 100ft / 30m (outdoors)||65ft / 20m (indoors) / 100ft / 30m (outdoors)|
|Working Temperature||32 to 122°F||32 to 122°F|
|Battery||400mAh rechargeable||400mAh rechargeable|
|Measurement Range||360 º|
|Wireless Data Rate||50Hz|
|Wireless Transmission Range||Up to 65ft / 20m|
|Dimensions||1.58 x 1.58 x 0.79"|
|Working Temperature||32 to 122°F|
Rotor Runout is an iPad application that works with the Wireless Rotor Runout Kit to automatically record both angle and displacement measurements at user-set test points, allowing users to view the real contour of a rotor.
Simultaneous wireless displacement measurement and rotating angle measurement Multiple displacement sensors connectivity (test up to 9 planes simultaneously) Applicable to both horizontal and vertical rotors User-defined number of test points on rotor circumference Zero sensors remotely on the iPad Sensor status page to show sensor signal strength, battery level and editable display name Probe meter with adjustable range/resolution and rotating needle Cartesian plot (angle-reading) and Polar plot Data smoothing using moving average Various test data exporting options (email, wireless print, AirDrop, saving to flash drive) PDF test report with test information, machine image, test results, note, tester signature and map Local test record manager to retrieve previous test data and reports BlueDial x1 BlueAngle x1 USB Charging Cable x2 USB Power Adapter x2 Protective Carrying Case x1 Runout App for iPad x1 User Manual x1
- iPad Mini 5 with Protective Case (Optional)
- Extended Warranty (Optional)